Drying Oven TR 450/C550 450 L, Tmax 300°C, Controller C 550

With their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.

• Tmax 300°C


• Operating range, room temperature +5 to 300°C


• Models TR 60 to TR 240 designed as tabletop models


• Models TR 420 and TR 1050 designed as floor standing models


• Horizontal, forced air circulation results in temperature uniformity better than ±5 °C


• Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean


• Large handle to open and close the door


• Charging in multiple layers possible using removeable trays (number of removeable trays included, see table below)


• Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420


• Double swing door with quick release for TR 1050


• TR 1050 equipped with transport castors


• PID microprocessor control with self-diagnostic system


• Infinitely adjustable exhaust at the rear wall with operation from the front


• Available controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)


• Solid state relays provide for low noise operation


• 220-240 V 1/N/PE 50/60 Hz connector as standard

Option:

• Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load


• Infinitely adjustable fan speed of the air-circulation


• Window for observing charge


• Further removeable grids with rails


• Side inlet


• Stainless steel collecting pan to protect the furnace chamber


• Door hinges on the left side


• Reinforced bottom plate


• Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °C


• Transport castors for model TR 450


• Upgrading available to meet the quality requirements of AMS 2750 E or FDA


• Process control and documentation via VCD software package for monitoring, documentation and control

The number of shelves included in the scope of delivery is listed in the table.