Representative Image

SCAT PE Fitting, 3.2 mm OD, Blue

Brand:SCAT

Colour

For ext. tubing Ø

Specifications

Compare models
Colour
Blue
For ext. tubing Ø
3.2 mm
Material
PE
Thread
UNF 1/4"
UNSPSC
41121815

$58.47

Inc. GST

Available soon

Product description

The SCAT PE Fitting, 3.2 mm OD, Blue, UNF1/4" is designed for reliable tubing connection in laboratory solvent handling and HPLC workflows. Made with an integrated ferrule, this fitting supports secure installation and dependable connection performance in compatible SCAT systems.

Key Features:

  • Brand: SCAT
  • Type: PE fitting
  • Outer Diameter: 3.2 mm OD
  • Colour: Blue
  • Connection: UNF1/4"
  • Design: Fitting with integrated ferrule
  • Application: Suitable for laboratory solvent handling and HPLC connection workflows

This SCAT PE fitting is suitable for laboratories requiring a blue 3.2 mm OD fitting with integrated ferrule for secure tubing connections.



Frequently Asked Questions

1. What is the SCAT PE Fitting, 3.2 mm OD, Blue, UNF1/4" used for?

The UNF1 is designed for laboratory solvent handling and HPLC connection workflows. This pe fitting format supports routine laboratory work in that application.

2. What are the main specifications of the UNF1?

The main specifications of the UNF1 are that the colour is Blue and the outer diameter is 3.2 mm OD. These are the main selection points to compare with the requirements of the laboratory task.

3. Is the UNF1 suitable for laboratory solvent handling and HPLC connection workflows?

Yes. The UNF1 is suitable for laboratory solvent handling and HPLC connection workflows. One relevant feature is that the design is Fitting with integrated ferrule, which supports use in that type of laboratory workflow. Where chemicals or solvents are involved, confirm that the product material is suitable for the specific substance and conditions before use.

4. How does the UNF1 connect to other equipment?

The UNF1 uses UNF1/4". This is the main connection detail to match with the rest of the laboratory setup.

Compare similar models

PE fitting, 3.2 mm OD, blue pack of 5
Available soon
SCAT PE Fitting, 3.2 mm OD, Blue

$58.47

Inc. GST

Manufacturer P/N

407063

Part Number

4.715 044

Manufacturer

SCAT

Colour

Blue

PE fitting, 1.6 mm OD, green pack of 5
Available soon
SCAT PE Fitting, 1.6 mm OD, Green

$58.47

Inc. GST

Manufacturer P/N

407061

Part Number

4.715 042

Manufacturer

SCAT

Colour

Green

PE fitting, 2.3 mm OD, purple pack of 5
Available soon
SCAT PE Fitting, 2.3 mm OD, Purple

$58.47

Inc. GST

Manufacturer P/N

407059

Part Number

4.715 043

Manufacturer

SCAT

Colour

Purple

Frequently asked questions

The UNF1 is designed for laboratory solvent handling and HPLC connection workflows. This pe fitting format supports routine laboratory work in that application.

Insights

Explore
Burette vs Pipette: Key Differences and Which to Use

1 min read

Burette vs Pipette: Key Differences and Which to Use

This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.

Read full story
Top 5 Brands for Graduated Cylinders in 2026

1 min read

Top 5 Brands for Graduated Cylinders in 2026

This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.

Read full story
Top 5 Brands for Erlenmeyer Flasks in 2026

1 min read

Top 5 Brands for Erlenmeyer Flasks in 2026

This guide compares the five Erlenmeyer flask brands most commonly used across Australian laboratories today: DWK Life Sciences (DURAN®), ISOLAB Laborgeräte, LLG Labware, BRAND and Kartell. Rather than treating all Erlenmeyer flasks as interchangeable, it breaks down what actually separates them in practice, wall thickness consistency, thermal shock resistance, neck and closure compatibility, and material choice between borosilicate glass and polypropylene, and explains which of these differences matter for which kind of lab work.

Read full story

$58.47

Inc. GST