Representative Image

Stirrer motor RW 20 digital S 1 speed range 60-2000 rpm, 115 V w/o accessories

Brand:IKA

Max. voltage

Min. voltage

Plug type

Power supply

Rated capacity

Specifications

Compare models
HS Code #
84798200
Clamping range
0.5 ... 10 mm
Depth
212 mm
Dimensions (WxDxH)
88 x 212 x 294 mm
Display
Digital
Power supply frequency
50/60 Hz
Height
294 mm
IP code
IP 20
Max. clamping width
10 mm
Max. speed
2000 1/min
Max. stirring capacity
20 l

Alternative in-stock items

$3,355.79

Inc. GST

Available soon

Product description

  • Technical improvements on the trusted RW 20 series design, mechanically controlled

  • With digital display

  • Robust, ergonomic design

  • Constant power-drive

  • Two speed ranges for universal use from 60 to 2000 rpm

  • Speed range I (at 50 Hz): 60 to 500 rpm

  • Speed range II (at 50 Hz): 240 to 2000 rpm

  • Hollow-shafted chuck for rotor shaft height adjustment (only when stationary)

Accessories

Plate stands for overhead stirrers and Dispersers T 18 and T 25

ProductTypeDepthMfr#Part#AvailabilityPrice
R 1825316 mm00031600009.224 031In stock$734.64
R 1826316 mm00031601009.224 032In stock$809.53
R 1827316 mm00031602009.224 033$863.02

Bossheads R 182 for overhead stirrers and Dispersers T 18 and T 25

ProductTypeUNSPSCMfr#Part#AvailabilityPrice
R 1824112241300026577009.224 292In stock$287.08

Compare similar models

Stirrer motor RW 20 digital S 1 speed range 60-2000 rpm, 115 V w/o accessories

Manufacturer P/N

0003593001

Part Number

4.008 109

Manufacturer

IKA

Max. voltage

115 V

Stirrer motor RW 20 digital speed range 60-2000 rpm, w/o accessories

Manufacturer P/N

0003593000

Part Number

9.816 622

Manufacturer

IKA

Max. voltage

240 V

Stirrer motor RW 20 digital S 2 speed range 60-2000 rpm w/o accessories

Manufacturer P/N

0003593002

Part Number

6.227 717

Manufacturer

IKA

Max. voltage

240 V

Stirrer motor RW 20 digital S 3 speed range 60-2000 rpm w/o accessories

Manufacturer P/N

0003593003

Part Number

6.239 372

Manufacturer

IKA

Max. voltage

240 V

Insights

Explore
Burette vs Pipette: Key Differences and Which to Use

4 mins read

Burette vs Pipette: Key Differences and Which to Use

This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.

Read full story
Top 5 Brands for Graduated Cylinders in 2026

4 mins read

Top 5 Brands for Graduated Cylinders in 2026

This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.

Read full story
Top 5 Brands for Erlenmeyer Flasks in 2026

4 mins read

Top 5 Brands for Erlenmeyer Flasks in 2026

This guide compares the five Erlenmeyer flask brands most commonly used across Australian laboratories today: DWK Life Sciences (DURAN®), ISOLAB Laborgeräte, LLG Labware, BRAND and Kartell. Rather than treating all Erlenmeyer flasks as interchangeable, it breaks down what actually separates them in practice, wall thickness consistency, thermal shock resistance, neck and closure compatibility, and material choice between borosilicate glass and polypropylene, and explains which of these differences matter for which kind of lab work.

Read full story