Representative Image

VACUUBRAND ATEX Chemical Membrane Pump MV 10C EX, VARIO Four-stage, 230V / 50HZ

Specifications

HS Code #
84141089
Connection pressure side
KF DN 16
Connection suction side
KF DN 25
Depth
457 mm
Dimensions (WxDxH)
560 x 457 x 410 mm
Flow rate
8.1 m³/h
Power supply frequency
50 Hz
Height
410 mm
IP code
IP 54
Max. permitted ambient temp.
40 °C
Max. voltage
230 V

$55,096.72

Inc. GST

Available soon

Product description

The VACUUBRAND ATEX chemical Diaphragm Pump MV 10C EX VARIO four-stage, 230 V / 50 Hz is a diaphragm vacuum pump from VACUUBRAND designed for oil-free evacuation and pumping of gases or vapours. With the ATEX VARIO ® chemical diaphragm pumps, the vacuum can be precisely controlled by adjusting the motor speed. Its documented configuration includes electrical supply: 230 V, 50 Hz, pump design: Four-Stage, and chemical resistance: High chemical resistance and oil-free operation.

Key Features:

  • Brand: VACUUBRAND
  • Model: MV 10C EX
  • Product Type: Diaphragm Vacuum Pump
  • Electrical Supply: 230 V, 50 Hz
  • Pump Design: Four-Stage
  • Chemical Resistance: High chemical resistance and oil-free operation
  • Ignition Source Prevention: The absence of sliding surfaces ensures that ignition sources are avoided
  • Vacuum Control: Short process times thanks to hysteresis-free VARIO ® vacuum control; With the ATEX VARIO ® chemical diaphragm pumps, the vacuum can be precisely controlled by adjusting the motor speed
  • Demand-Based Operation: The pump runs only as fast as necessary, according to demand: minimal power consumption, extended maintenance intervals, quiet operation
  • External Control: The pump is driven by an additional control signal line
  • Vacuum Controller Option: The optional vacuum controller VACUU·SELECT, with an ATEX vacuum sensor and Connection Box 100, enables fully automatic evaporation without the need for parameter setting or user programming
  • Adaptive Vacuum Control: With the adaptive control, it finds the boiling pressure indepentently and adjusts the vacuum continuously and optimally according to the vapour pressure
  • ATEX Compliance: ATEX compliance:
  • Pumping Chamber Classification: Pumping chamber (gases pumped): II 2G Ex h IIC T3 Gb X
  • External Area Classification: External area (pump surroundings): II 2G Ex h IIB T4 Gb X (with inert gas purging) / II 3G Ex h IIB T4 Gc X (without inert gas purging)
  • Motor Classification: Motor: II 2G Ex db IIB T4 Gb

The VACUUBRAND ATEX chemical Diaphragm Pump MV 10C EX VARIO four-stage, 230 V / 50 Hz supports oil-free evacuation and pumping of gases or vapours where the stated configuration is required. Confirm process compatibility, wetted materials, electrical supply, connections, and included components before ordering.

More items to explore

Chemistry Diaphragm Vacuum Pump MZ 2C EX with ATEX compliance

ProductPlug typeTypeMfr#Part#AvailabilityPrice
stranded wireMZ 2C EX206969206.204 334$14,096.21

Frequently asked questions

It is a diaphragm vacuum pump from VACUUBRAND designed for oil-free evacuation and pumping of gases or vapours. With the ATEX VARIO ® chemical diaphragm pumps, the vacuum can be precisely controlled by adjusting the motor speed.

Insights

Explore
Burette vs Pipette: Key Differences and Which to Use

4 mins read

Burette vs Pipette: Key Differences and Which to Use

This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.

Read full story
Top 5 Brands for Graduated Cylinders in 2026

4 mins read

Top 5 Brands for Graduated Cylinders in 2026

This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.

Read full story
Top 5 Brands for Erlenmeyer Flasks in 2026

4 mins read

Top 5 Brands for Erlenmeyer Flasks in 2026

This guide compares the five Erlenmeyer flask brands most commonly used across Australian laboratories today: DWK Life Sciences (DURAN®), ISOLAB Laborgeräte, LLG Labware, BRAND and Kartell. Rather than treating all Erlenmeyer flasks as interchangeable, it breaks down what actually separates them in practice, wall thickness consistency, thermal shock resistance, neck and closure compatibility, and material choice between borosilicate glass and polypropylene, and explains which of these differences matter for which kind of lab work.

Read full story