Representative Image

BRAND Cavity Slide With Concavity, Thickness 1.2-1.5 mm, 76x26 mm, Ground Edges Pack Of 50

Brand:BRAND

No. of deepenings/ chambers

Specifications

Compare models
HS Code #
70179000
Depth
76 mm
Deepenings/ chambers Ø
18 mm
Dimensions (WxD)
26 x 76 mm
Edge finish
Ground
Material
Glass
No. of deepenings/ chambers
3
Thickness
1.5 mm
UNSPSC
41122601
Width
26 mm

$604.21

Inc. GST

Available soon

Product description

The BRAND Cavity Slide With Concavity, Thickness 1.2-1.5 mm, 76x26 mm, Ground Edges Pack Of 50 is designed for microscopy where a recessed well is needed to hold liquid specimens, suspensions or live samples. Its optical glass construction, defined concavity and ground edges provide a practical slide format for routine observation.

Key Features:

  • Brand: BRAND
  • Product Type: Single-concavity microscope slide for liquid specimens and microscopy
  • Optical Glass: Hydrolytic class 3 optical glass supports routine microscope observation.
  • Concavity Geometry: The concavity is 15-18 mm in diameter and 0.6-0.8 mm deep for holding small liquid specimens.
  • Slide Thickness: The slide thickness is 1.2-1.5 mm.
  • Ground Edges: Ground edges and a polished rim provide a finished handling surface.
  • Pack Size: Supplied as a pack of 50 slides.

The BRAND Cavity Slide With Concavity, Thickness 1.2-1.5 mm, 76x26 mm, Ground Edges Pack Of 50 is well suited to laboratories that need a standard cavity slide with clearly defined thickness and concavity dimensions.

Compare similar models

Cavity slide w.concav. thick. 1,2-1,5 mm 76x26 mm ground edges pack of 50

Manufacturer P/N

475565

Part Number

4.711 551

Manufacturer

BRAND

No. of deepenings/ chambers

3

Cavity slide w.concav. thick. 1,2-1,5 mm 76x26 mm ground edges with 2 concavities optical glass, hydrol. class 3, pack of 50

Manufacturer P/N

475505

Part Number

4.711 550

Manufacturer

BRAND

No. of deepenings/ chambers

1

Cavity slide w.concav. thick. 1,2-1,5 mm 76x26 mm ground edges

Manufacturer P/N

475535

Part Number

7.020 118

Manufacturer

BRAND

No. of deepenings/ chambers

2

Frequently asked questions

It is used for microscope observation of specimens that benefit from a recessed well, including liquid samples and suspended material.

Insights

Explore
Burette vs Pipette: Key Differences and Which to Use

4 mins read

Burette vs Pipette: Key Differences and Which to Use

This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.

Read full story
Top 5 Brands for Graduated Cylinders in 2026

4 mins read

Top 5 Brands for Graduated Cylinders in 2026

This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.

Read full story
Top 5 Brands for Erlenmeyer Flasks in 2026

4 mins read

Top 5 Brands for Erlenmeyer Flasks in 2026

This guide compares the five Erlenmeyer flask brands most commonly used across Australian laboratories today: DWK Life Sciences (DURAN®), ISOLAB Laborgeräte, LLG Labware, BRAND and Kartell. Rather than treating all Erlenmeyer flasks as interchangeable, it breaks down what actually separates them in practice, wall thickness consistency, thermal shock resistance, neck and closure compatibility, and material choice between borosilicate glass and polypropylene, and explains which of these differences matter for which kind of lab work.

Read full story