Representative Image

ESCO CelCulture CCL-240T-8-NF-HHS, CO₂ Incubator, 240L, IR CO₂ & O₂ Control, No ULPA Filter, 180°C High Heat Sterilization

Brand:Esco

Depth int.

Ext. dim. (WxDxH)

Ext. depth

Ext. width

Int. Dim. (WxDxH)

Int. width

Nominal capacity

Rated capacity

Temperature

Type

Weight

Specifications

Compare models
CO₂ range
0 ... 19.5 %
Depth int.
640 mm
Ext. dim. (WxDxH)
750 x 770 x 905 mm
Ext. depth
770 mm
Ext. height
905 mm
Ext. width
750 mm
Power supply frequency
50/60 Hz
Height int.
633 mm
Int. Dim. (WxDxH)
595 x 640 x 633 mm
Int. width
595 mm

$39,787.57

Inc. GST

Available soon

Product description

The ESCO CelCulture CCL-240T-8-NF-HHS CO₂ Incubator is a 240L capacity incubator designed for precise control of CO₂ and O₂ levels, making it ideal for cell culture applications requiring strict environmental conditions. Equipped with an infrared (IR) CO₂ sensor and an O₂ sensor, it ensures accurate monitoring and control of gas concentrations. The incubator features a 180°C high heat sterilization cycle for effective decontamination. The chamber is constructed from stainless steel and is coated with Isocide™ antimicrobial coating to prevent microbial growth.

Key Features:

  • Brand: ESCO
  • Model: CCL-240T-8-NF-HHS
  • Capacity: 240 liters
  • CO₂ Control: Infrared (IR) sensor with a range of 0–19.5%
  • O₂ Control: Sensor with a range of 1–18%
  • Temperature Range: Ambient +5°C to 60°C
  • Humidity Range: 85–90% RH
  • Filtration: No ULPA filter
  • Decontamination: 180°C high heat sterilization cycle
  • Construction: Stainless steel chamber with Isocide™ antimicrobial coating
  • Power Supply: 220–240V AC, 50/60 Hz
  • Dimensions (W x D x H): 750 x 770 x 905 mm
  • Weight: 155 kg

This incubator is suitable for applications in cell culture, microbiology, and other laboratory research requiring controlled environmental conditions.

Compare similar models

CelCulture® Incubator CCL-240T-8-NF-HHS 240 L, IR sensor, CO2-&O2 control, no ULPA filter 180°C High Heat Sterilization
Available soon
ESCO CelCulture CCL-240T-8-NF-HHS, CO₂ Incubator, 240L, IR CO₂ & O₂ Control, No ULPA Filter, 180°C High Heat Sterilization

$39,787.57

Inc. GST

Manufacturer P/N

2170302

Part Number

4.678 091

Manufacturer

Esco

Depth int.

640 mm

CelCulture® Incubator CCL-170T-8-NF-HHS 170 L, IR sensor, CO2-&O2 control, no ULPA filter 180°C High Heat Sterilization
Available soon
ESCO CelCulture CCL-170T-8-NF-HHS, CO₂ Incubator, 170L, IR CO₂ & O₂ Control, No ULPA Filter, 180°C High Heat Sterilization

$28,829.37

Inc. GST

Manufacturer P/N

2170301

Part Number

4.678 090

Manufacturer

Esco

Depth int.

535 mm

Frequently asked questions

It is a 240L capacity incubator designed for precise control of CO₂ and O₂ levels, making it ideal for cell culture applications requiring strict environmental conditions. Equipped with an infrared (IR) CO₂ sensor and an O₂ sensor, it ensures accurate monitoring and control of gas concentrations. The incubator features a 180°C high heat sterilization cycle for effective decontamination. The chamber is constructed from stainless steel and is coated with Isocide™ antimicrobial coating to prevent microbial growth.

Insights

Explore
Burette vs Pipette: Key Differences and Which to Use

4 mins read

Burette vs Pipette: Key Differences and Which to Use

This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.

Read full story
Top 5 Brands for Graduated Cylinders in 2026

4 mins read

Top 5 Brands for Graduated Cylinders in 2026

This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.

Read full story
Top 5 Brands for Erlenmeyer Flasks in 2026

4 mins read

Top 5 Brands for Erlenmeyer Flasks in 2026

This guide compares the five Erlenmeyer flask brands most commonly used across Australian laboratories today: DWK Life Sciences (DURAN®), ISOLAB Laborgeräte, LLG Labware, BRAND and Kartell. Rather than treating all Erlenmeyer flasks as interchangeable, it breaks down what actually separates them in practice, wall thickness consistency, thermal shock resistance, neck and closure compatibility, and material choice between borosilicate glass and polypropylene, and explains which of these differences matter for which kind of lab work.

Read full story

$39,787.57

Inc. GST