Share :
Everything you need to know about measuring cylinders
Updated On 07/20/2023
Measuring cylinders, also known as graduated cylinders, are essential tools used in various scientific and laboratory settings to accurately measure the volume of liquids. They are typically made of glass or polypropylene (PP) and come in different forms such as tall form or short form.
The main purpose of a measuring cylinder is to provide precise measurements with graduations marked along its length. These graduations allow for accurate readings of liquid volumes. Measuring cylinders are available in different classes, namely Class A and Class B.
Class A measuring cylinders offer the highest level of accuracy, with tighter tolerances and smaller measurement errors. They are commonly used in laboratories where precision is crucial. On the other hand, Class B measuring cylinders have slightly larger tolerances but still provide reliable measurements for general laboratory use.
When using a measuring cylinder, it is important to handle it carefully to avoid any breakage or damage. The liquid being measured should be poured slowly into the cylinder while keeping it on a flat surface to ensure accurate readings.
In summary, measuring cylinders play a vital role in scientific and laboratory settings for accurately measuring liquid volumes. They come in various forms such as glass or PP, and different classes (Class A and Class B) depending on the required level of accuracy. By following proper handling techniques, accurate measurements can be obtained using these essential tools.
Please click the link below to access all the measuring cylinders that are currently in stock with LabFriend -
Related Stories
Basic Introduction to Muffle Furnaces
A muffle furnace, also known as a chamber furnace or box furnace, is a type of furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash. This is achieved by placing the material inside a sealed chamber, or muffle, which is then heated by heating elements.
What are the different vortex mixers for laboratory applications?
A device that creates a vortex to mix two liquids in tubes of varying sizes.
Burette vs Pipette: Key Differences and Which to Use
This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.
Top 5 Brands for Graduated Cylinders in 2026
This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.