Representative Image

Jutec 5-Finger Gloves H0150013, Size 10, Length 250 mm, Up to 250°C Contact Heat for a Short Time, Kevlar with Lining, CE KAT II, EN 388:2016, EN 407:2004, Pair

Brand:JUTEC

Glove size

Length

Specifications

Compare models
Colour
Yellow
Glove size
10
Length
250 mm
Material
Cotton wool
Max. temp. resistance
250 °C
PPE category
III
Temperature resistance
250 °C
UNSPSC
46181538
Washable
Yes

$58.47

Inc. GST

Available soon

Product description

The Jutec 5-Finger Gloves H0150013, Size 10, Length 250 mm, Up to 250°C Contact Heat for a Short Time, Kevlar with Lining, CE KAT II, EN 388:2016, EN 407:2004, Pair are designed for reliable hand protection in high-temperature and industrial handling applications. Made from KEVLAR® coarse knit with cotton insulation, these gloves provide a soft feel while delivering insulation, cut resistance, and dependable short-term contact heat protection up to 250°C. Their practical 5-finger design supports dexterity and comfort in professional working environments.

Key Features:

  • Brand: Jutec
  • Type: 5-finger gloves
  • Model: H0150013
  • Size: 10
  • Length: 250 mm
  • Material: KEVLAR® coarse knit with cotton insulation and lining
  • Heat Protection: Up to 250°C contact heat for a short time
  • Compliance: CE KAT II, EN 388:2016, EN 407:2004
  • Design: Soft, insulating, cut-resistant, and washable
  • Packaging: Pair

These Jutec protective gloves are a practical choice for users needing dependable heat resistance, cut protection, and comfort for routine industrial and laboratory handling tasks.

Compare similar models

5-finger gloves H0150013, size 10, length 250mm up to 250°C contact heat for a short time, Kevlar with lining,CE KAT II,EN 388:2016,EN 407:2004,pair

Manufacturer P/N

0100193

Part Number

6.315 697

Manufacturer

JUTEC

Glove size

10

5-finger gloves H0150035, size 10, length 350mm up to 250°C contact heat for a short time, Kevlar with lining, CE KAT II, EN 388, EN 407, pair

Manufacturer P/N

0100196

Part Number

6.315 698

Manufacturer

JUTEC

Glove size

10

Gloves made of Kevlar®-knit, size 8 with lining, cut-resistant, length approx 250mm, pair

Manufacturer P/N

0101055

Part Number

4.688 617

Manufacturer

JUTEC

Glove size

8

Frequently asked questions

The it are designed for reliable hand protection in high-temperature and industrial handling applications. Made from KEVLAR® coarse knit with cotton insulation, these gloves provide a soft feel while delivering insulation, cut resistance, and dependable short-term contact heat protection up to 250°C. Their practical 5-finger design supports dexterity and comfort in professional working environments.

Insights

Explore
Burette vs Pipette: Key Differences and Which to Use

4 mins read

Burette vs Pipette: Key Differences and Which to Use

This guide explains the practical difference between a burette and a pipette, two instruments that are often confused because both dispense measured volumes of liquid, but that are built for genuinely different jobs. It breaks down how a burette's stopcock and full-length graduated scale let an operator dispense a variable, watched volume and stop the instant a reaction reaches its endpoint, versus how a pipette (volumetric, graduated or micropipette) is built to transfer one known or pre-set volume in a single action. Rather than presenting the two as competing options, the piece frames them as complementary tools tied to different steps in a procedure: burettes for titration and any reaction where the target volume isn't known in advance, pipettes for sample preparation, dilutions and any step where the volume is already fixed.

Read full story
Top 5 Brands for Graduated Cylinders in 2026

4 mins read

Top 5 Brands for Graduated Cylinders in 2026

This guide compares the five graduated cylinder brands most commonly used across Australian laboratories: Hirschmann Laborgeräte (DURAN® glass), Kartell (PMP plastic), ISOLAB Laborgeräte, BRAND (BLAUBRAND®) and VITLAB. Rather than treating graduated cylinders as interchangeable, it breaks down what actually separates them, Class A versus Class B accuracy tolerances, glass versus plastic construction, base stability and certification standards such as USP conformity, and explains which of these differences genuinely matter depending on the work.

Read full story
Top 5 Brands for Erlenmeyer Flasks in 2026

4 mins read

Top 5 Brands for Erlenmeyer Flasks in 2026

This guide compares the five Erlenmeyer flask brands most commonly used across Australian laboratories today: DWK Life Sciences (DURAN®), ISOLAB Laborgeräte, LLG Labware, BRAND and Kartell. Rather than treating all Erlenmeyer flasks as interchangeable, it breaks down what actually separates them in practice, wall thickness consistency, thermal shock resistance, neck and closure compatibility, and material choice between borosilicate glass and polypropylene, and explains which of these differences matter for which kind of lab work.

Read full story

$58.47

Inc. GST